產品搜索
在線客服
 工作時間
周一至周五 :8:30-17:30
周六至周日 :9:00-17:00
聯系方式

聯系人:冀先生

電 話:

(+86)0314-2266829

手   機:

(+86)18831479808   

(+86)13191633902   

(+86)15933650049

(+86)15128586857

微信:18831479808

郵 箱:btsdyb@163.com

地 址:河北省承德技術產業開發區上板城工業園


website qrcode

掃描查看手機版網站

產品詳情
XBM表觀密度測定儀
分享到:
XBM表觀密度測定儀 
下一個
產品詳情

     

XBM系列表觀密度測定儀

表觀密度測定儀

表觀密度測定儀主要用于塑料能從規定漏斗中流出松散材料(粉料或粒料)的表觀密度測定,是科研院所、化工行業實驗室以及塑料廠家原料進廠質量檢驗的理想的測試儀器。

XBM-1表觀密度測定儀

滿足GB/T3402.1-2005 塑料氯乙烯均聚和其聚樹脂

GB/T 20022-2005 塑料 氯乙烯均聚和共聚樹脂 表觀密度的測定

XBM-2表觀密度測定儀

滿足GB/1636《能從規定漏斗流出的材料表觀密度的測定》國家標準。

 GB/20022-2005 塑料 氯乙烯均聚和共聚樹脂表觀密度的測定》

XBM-3表觀密度測定儀滿足GBT 3402.1-2005 塑料 氯乙烯均聚和其聚樹脂 、

           GB/1636《能從規定漏斗流出的材料表觀密度的測定》國家標準

    GB/20022-2005 塑料 氯乙烯均聚和共聚樹脂表觀密度的測定》

型號分類:1型、2型、3

主要組成部分:底座、支承架、漏斗、插板、受料器

受料器容積:100mL±0.5mL

取樣量:110mL120mL

XBM-4型表觀密度測定儀

表觀密度測定儀主要用于塑料能從規定漏斗中流出松散材料(粉料或粒料)的表觀密度測定,是科研院所、化工行業實驗室以及塑料廠家原料進廠質量檢驗的理想的測試儀器。

表觀密度測定  

表觀密度測定儀適用于洗滌劑的測試,主要符合GB/T13173-2008等相關標準要求。

GB 20022-2005 塑料 氯乙烯均聚和共聚樹脂表觀密度的測定》

受料器容積:500mL±0.5mL

取樣量:510550mL

漏斗1規格:漏斗上口內徑:108mm下口內徑:40mm

漏斗2規格:漏斗上口內徑:112mm下口內徑:60mm

表觀密度測定儀為鋼材質,防銹處理。

表觀密度檢測設備-表觀密度測定儀本方法適用于測量粉料模塑料的表觀密度,即單位體積中的質量,為模塑料的包裝,模具型腔和擠出螺桿的設計提供參數。碳鋼表觀密度測定儀,不銹鋼表觀密度測定儀。

Apparent density detection equipment - apparent density meter this method is suitable for measuring the apparent density of powder materials molding compound, namely quality of unit volume, for the mould of plastic packaging, mold cavity and the parameters for the design of extruder screw.
The apparent density detection equipment - density meter in accordance with GB/T 3402, GB 1636 ISO 6818 standard ASTM D 1895.
1, sample: extract as stipulated in the product standard sample.
2, test instruments:
Sense of balance: (1) the amount of 0.1 grams
(2) the apparent density meter
(3) measuring cylinder type measuring cup: 100 ml
3 the apparent density detection equipment - density meter test steps:
(1) the funnel to the instrument, its bottom small incision in the measuring cylinder is above 20-40 mm, and as far as possible with measuring cylinder axis.
(2) insert the keep-off plate funnel, add 100 + 5 ml sample into the funnel.
(3) quickly left open baffle plate, let the test free flow into the measuring cylinder, the upper cylinder is measured with a scraper scrape off the excess sample and weighing of the cylinder sample on balance, accurate to 0.1 grams.
(4) for each batch of material tested three times (already test sample may not be reused.)